Nazgul5 V2 4S/6S – BNF

Nazgul5 V2 is a 5″ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

HIGHLIGHTS:

– 5mm arm design for more durability

– Easy-Swap arms

– LED illuminated Logo

– XING-E 2207 motors and NAZGUL 5140 props
– 5″ version also fits 5.1″ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

• SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
• SucceX-E F7 V2.1 Flight Controller
• XING-E 2207 FPV Motor （6S 1800KV / 4S 2750KV)
• Wheelbase:   240mm*240mm
• Body size: 170*170mm
• Propeller size: 5 inch /5.1 inch
• FC pattern: 30.5*30.5/20*20 mm
• FPV cam spacing: 19mm
• Weight: 393.4g (without battery)

PRE-TUNED & PRE-SETUP:

– Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on “Firmware/Factory Dumps”

– Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on “How to disable Angle-Mode, activate Acro-Mode”

Nazgul5 V2 Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1x Nazgul5(XL5 V5) Frame
• 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
• 1x Albatross RHCP SMA 5.8g antenna
• 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
• 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
• 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Changelog:

May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.

June 2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.

December 2021: 4S version before SucceX-E F7 flight controller changed to BLITZ F7

 

FC // SucceX-E F7 Flight controller

– MCU: STM32F722 216MHz

– Gyro: MPU6000

– Baro: NO

– OSD: IFLIGHT OSD （AT7456E）

– BEC: 5V 2.5A

– BlackBox: 16MB

– Currentscale: 100（WithiFlightESC）

– Uart: 4*UART(UART1、UART2、UART4、UART5)

– UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry

– UART2 for Receiver

– UART4 for Free

– UART5 for ESC Telemetry

– 4×Dshot/PWM outputs

– Smartaudio & IRC Tramp VTX protocol supported

– WS2812 led Strip: Yes

– Bepper: Yes

– Firmware: IFLIGHT_SUCCEX_E_F7

– Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

– Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

– Dimension: 36*43mm

– Mounting Holes: 30.5*30.5mm/Φ3mm

– Weight: 15g (without wire)

– Supports 2-6S Lipo input

– EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

– Current sensor: YES

– BEC: NO

-Constant: 45A / Burst: 50A

– Supports: DShot150/300/600/MultiShot/OneShot etc.

– Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

– The output power is stable;

– Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

– Output 48 frequency points,

– Frequency lock fast, the boot does not interfere with companions;

– Built-in output power self-check function;

– Full format video format: NTSC /PAL;

– Wide input voltage range. low power consumption:

7V～36V，+12V/380mA@800mW;

– Small size:36*36*3mm

– Mounting holes 4-M3

– Lightweight: 7.2g(excluding antenna)

Specs:

– Item: SucceX-Force 800mW adjustable VTX

– Input voltage:5V

– Output voltage/ Max current: 5V 1A

– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@400mW, 380mA@800mW

– Output 48 frequency points,

– size:36*36*3mm

– PIT/25mW/200mW/400mW/800mW

Additional Suggested Parts

• Battery 4S 1550mAh
• Battery 6S 1300mAh